DIY Wood Pendant Light

To make this pendant light all I used was BAND-IT Iron-On Veneer, an iron, some wire, a lighting kit, and two 10" embroidery hoops from Hancock Fabrics.  It's really cheap and easy.

Wire one of the hoops to the light kit, making sure the kit is centered.  Trim the edge to just about an inch bigger than the10" hoop circumference.  Start ironing the veneer to the inner hoops at the top and bottom edges.  Make sure the veneer, where overlapped, is nice and melted.  That's all folks.  Love, Mallory